Being a fanatic of a specific brand of car speakers takes heart and loyalty. Loyalty is just never given for free; it takes performance and delivery. Some of the best car speaker makers are Kenwood. Kenwood has been a specialist of car speakers and audio devices for a long time and has over the ages produced their products through a series of updates and improvements.
Most of the best Kenwood speakers are easy to install, cheap and have good sound quality. We, therefore, thought it would be such a great idea if we shared them with those of you who are fanatics or audiophiles on the hunt for the best car speakers. That is why we dug deep to find the best Kenwood speakers available in the market.
*Below, you'll find our more detailed reviews, but you can also click the links above to see current prices or read customer reviews on Amazon.
If you are really after upgrading your car speakers but on a fixed budget, then this is one of the best Kenwood 6.5 speakers you should go for. It is a 2-way speaker that features a polypropylene cone that will enrich your favorite playlist with midrange and mid-bass details.
The mid-bass can go as low as 35 Hz, and the midrange can go as highs 22 kHz which gives this speaker a bigger and widespread response. To complete on the other end is the 1-dome balanced tweeter that will soar with high frequencies.
For power handling, it boasts of 300 watts of power and an RMS value of 30 watts. This means that it will work with a modest amplifier effectively. You don’t need a high power amplifier. What makes it even more appealing about this speaker is that it has an impedance of 4 ohms which means it will work well with the underrated wires of the factory system.
If you are looking for a component speaker to upgrade your factory speakers with, then this will be your ideal choice. It features an injected polypropylene cone with a diamond array pattern and converted crossover network.
On frequency response, we can say it is fair. It goes as low as 63Hz and as high as 24 Hz which means you will hear more of the highs and the midrange. What about its power handling qualities? This pair of component speakers excels when it comes to how it handles power.
These are some of the best midrange speakers produced by Kenwood. If you are not so much into the bass details, then these will be the best for you. They have a frequency response of 75Hz to 20 kHz that is covered through the 3-way configuration.
This means that the midrange woofer will go as low as 75 Hz, a frequency that falls within the limit that the human ears could have captured anyway. The two tweeters hit as high as 20 kHz. For power handling, these speakers are great.
They have a peak power of 150 watts which means that for the short bursts of power that your amplifier will be releasing, these speakers will handle them well. They also operate on a continuous power of 75 watts which is actually necessary to drive the three components which are the woofer, tweeter, and the super tweeter.
What makes this speaker different from the Kenwood KFC-1665S 6.5 coaxial speaker’s stereo is the price. This one is a little cheaper. On other features, they are almost of the same. This one has a 2-way configuration with a woofer that will enrich your music with midrange frequencies. The 1 balanced-dome tweeters, on the other hand, will make the high frequencies roar of your speakers.
What’s more, it has a 6.5-inch cone that is polypropylene made. The tweeter on the other end is 1 inch and balanced right in the middle of the cone for a clear stereo field. These speakers are efficient when it comes to the consumption of power.
What this speaker excels in is the cone. It has a carbon-polypropylene hybrid cone with a diamond array pattern. To make it more durable and withstand the high hitting cone vibrations, they are fitted with a rubber surround. They have an averagely good sensitivity of 87 dB. That is why its power ratings are as high as 240W.
On matters dealing with frequency production, they have a response of 63 Hz to 24 kHz. This means that the 1-inch silk dome midrange will go as low as 63 Hz and give you that sweet mid-bass in your music and cover most of the midrange frequencies which includes crystal clear vocal frequencies. On the other end, the high frequencies are played by a ¾ inch PEI dome tweeter.
There is no doubt that these are one of the best car speakers. Let’s start with the sound quality. This pack of 2 speakers is made to bring the experience of music live inside your car. The speakers excel when it comes to sound quality; they have a frequency response range of between 30Hz to 22,000Hz.
Such a frequency response range means that you can hear frequencies as low as 30Hz, which mostly are the sub-bass. If you really want to feel the energy of the music, then the best speakers to go for are those that give low frequencies like this one.
They are also 3-way speakers; each speaker consists of a woofer, a tweeter and super tweeter. The woofer, of course, is responsible for the low and the low-mid frequencies. The tweeter covers the high mid frequencies and the super tweeter deals with the high frequencies.
This brings the staging effect to your car. It also improves the sound quality since the frequencies are well equalized into three bands. What about power handling? Each speaker has a peak power handling capacity of 400 watts and an RMS value of 45 watts.
Are you looking for the best 6 by 8 inches speakers? Kenwood has developed another series of the best car speakers, coaxial and 3-ways speakers. These speakers are crystal clear and crisp, thanks to the 3-way configuration. The frequencies are equalized into three channels, the bass, mid and the high frequencies.
This overturns the muddiness that most 2-way speakers have where frequencies of the different ranges are forced through one driver. They have a frequency response range of between 63Hz to 22 kHz; this means that you will be able to hear the bass as low as 63Hz and high frequencies as high as 22 kHz. A frequency range of this kind means that you won’t be able to hear most of the sub bass. Hooking them up with a subwoofer will be a wise idea.
On power handling, they each have a peak value of 80 watts, impedance of 40 Ohms and sensitivity of 87 decibels. What this value means is that they can handle the power of not more than 80 watts. Driving them on low powered amplifiers will be good.
The sensitivity means that even at a power supply of as low as 1 watt, the speaker will still be able to get as loud as 87decibels. The impedance is the resistance that the speakers offer, which is low and, therefore, reduce power consumption.
Are you looking for a good performing speaker that is good for the budget? Kenwood KFC-4675C is one of such speakers. It is a 2-way speaker comprising of a tweeter and a woofer. The woofer is made of an injected and molded polypropylene cone woofer. Propylene is known to be flexible, light and durable. It can displace enough air giving a heavy bass.
The tweeter, on the other hand, is made of 1-inch polyamide balance dome tweeter. With this type of a dome, it can produce clear and moderate high frequencies. While these speakers might not be “performance series,” they have good power handling capacity. They can handle power from high-power head units.
With a size of 4 inches by 6 inches, they can be quickly and simply installed on the dash board without major modifications. The factory grills also fit them perfectly. You don’t need to get worried about buying extra grills or mounting tools.
This is a very important factor that needs to be considered when looking for the best car speakers. It not only falls on the best Kenwood speakers but also all the vehicle speakers. There are basically two types of speakers available in the market, Coaxial and component speakers. Knowing the difference between coaxial and component speakers is very important as explained in this video.
Most of the Kenwood speakers are coaxial or full range speakers, a few of them are component speakers. The coaxial type is the most preferred because of the ease to install them, and they are cheaper. If you are doing your car system upgrade on a tight budget limit, then the best one to go for is the Kenwood coaxial speakers. They are cheap and will never require advanced skills when installing them.
If you are generous with your wallet, the best ones to go are the component speakers. They are expensive, and you will get the most out of them. They are good with clarity and frequency response. You will have that freedom to position the components wherever you feel like positioning them.
Kenwood has really tried to bring the features of their component speakers out. They have powerful mid-bass woofers that can play as low as 65Hz. A woofer like this one could be the best one to go for since you will be able to hear the bass details of the speaker.
They also have good midrange drivers that are good for sound quality and sound response. Tweeters also play a great role in bringing out the overall sound. You might want to see how they have made the tweeters and their capabilities.
See Also: Best JBL Car Speakers
This is another factor that you should carefully consider when looking for car speakers and mostly Kenwood speakers. Most of the Kenwood speakers are 2-way. For a 2-way speaker, it means you will have a woofer and a tweeter. This will affect the sound details that will come out of it. You might mostly hear the midrange frequencies and the highs only.
A 3-way, on the other hand, will have a woofer, midrange component, and a tweeter. In this case, it means you will have a more detailed sound coming out of the speakers. The low frequencies that represent the bass will come out of the woofer will the vocals.
Most of the instruments will be played out of the midrange component and the high melodies, percussions and hats will be played out of the tweeter. This means therefore that if you are left with an option of a 2-way and a 3-way speaker after considering other factors, your best option would be a 3-way speaker.
When it comes to power handling, there is no questionable doubt why you shouldn’t consider this factor. It is one of the major features that are used to determine the strength of any speaker. There are normally two values quoted when naming a speaker’s power handling rating; these are the peak value and the Random Mean Square (RMS).
These two values refer to the maximum and mean continuous power output from the amplifier that the speaker will receive. Most of the time the peak rating is not necessary as it is exaggerated by manufacturers. RMS is the key when noting the ratings. The higher the RMS value, the higher your amplifier’s power requirement.
Speaker specifications always include the minimum and the maximum values. The minimum value is not commonly included in many speakers. If you ever come across a speaker with a minimum rating, this is the minimum value of the amplifier output that if sent to the speaker will make it produce some sound.
A maximum rating means the highest point at which the amplifier should supply power to the speaker beyond which the speaker will distort.
Impedance is the amount of resistance that the speaker offers to the electrical signal that is passed to it before it is converted to sound. A speaker on its own is a resistor, but what makes impedance different is it changes with the electrical signal.
Since music has different frequencies, the impedance will keep changing, but it will always range from a mean value which is given as a specification. A 4-ohm speaker is likely to require an amplifier that will give out enough power.
Since most speakers have this much impedance, it is important to consider this value. A higher impedance speaker will use the power of the AV receiver and work well.
Most of the speakers vary when it comes to the material used in making them. Tweeters use materials like polyurethane, silk and textiles. Some will come with materials like ceramics, metal, and graphite which are known for pop sound and handling higher tunes.
For the woofer, they are mostly made of polypropylene which is known to handle and withstand pumping basses. The rubber surround is also a good material to offer support to the cone.
Foam or cloth surrounds can be used though they are expensive. You should, therefore, watch for this material as you shop for your best Kenwood car speakers.
A lowly powered stereo system will require highly sensitive speakers and the high powered stereo system will require a less sensitive speaker.
Budgeting is the key when shopping. For more capability speakers, you will need to adjust your budget to a higher level. There are cheap speakers however that will still sound good. Most of them are Kenwood speakers. It is always important that if you decide to go for component speakers, you should look at the budget for installing them.
As you can see, selecting the best speaker will entirely depend on your mastery of the vital factors. From our review, we analyzed five best Kenwood speakers based on those vital factors, and we found the winner to be the Kenwood KFC 1665S 6.5 Coaxial speakers stereo.
It excels in a number of things; its frequency response is bigger and wide from as low as 35 Hz to as high as 22 kHz. This is something that we found extremely marvelous. Secondly is the components, the woofer is rightly made with propylene material, and the tweeter is a 1-inch dome balanced tweeter.
Price wise we can say it excels as well. Among the five speakers that we reviewed, it comes second in terms of price putting it in a good position to be your best potential cheap 6.5 car speaker. We would like, therefore, to recommend this speaker to you.
Have you ever used any of the best Kenwood speakers that we have just reviewed? If yes, how is it performing in terms of the quality of sound? Which one do you think of buying next among those that we have reviewed?
Here at Car Speaker Land we have only one goal: to bring you the best speakers around. Well, actually we have two goals: we also want to make sure that you’re able to get things going without having to pay the steep fees which are often charged for even the most basic procedures in auto shops.